High Efficiency Longitudinal Seam Welding Machine Diameter 500mm

High Efficiency Longitudinal Seam Welding Machine Diameter 500mm

 

 

Indoduction:

This set equipment is the most economical configuration,with high efficiency

and reliable quality,they can let users make raw materials to rough poles

without cooperation.

 

light pole processing equipment:

 

1. CTL 6*1800 cut to length line

2. 2-WE67Y-400/7000 tandem press brake(for the bend street poles)

 

3. 500/14000 automatic light pole welding production line

 

4. 63T light pole straightened machine.

5. shearing machine for cut the base plate

6. iron worker for punching the hole of base plate

7. base plate welding machine

8. light pole door cutting machine

 

light pole machining step:

 

 

1. cut to length line

 

decoiler---side guiding unit---leveling machine---cutting machine transverse shear ---taper slitting

It is for light pole material uncoiling, leveling, cutting, scrape edge slitting and taper slitting process,

to get one side small width, one side big width steel plate.

 

2. CNC Tandem press brake tobend the pole

This machine was combined by two sets of press brake. tandem achieve synchronization working.

single machine was combined by worktable ram and right and left wall board. wall board adopt

assemble structure due to the transportation. the rack has enough rigidity. two cylinders install to

the right and left wall board, under the effect of electric operation system, drive the slider running

down. on slide there is upper dies, when upper and lower dies touch workpieces, system raise

pressure, form the workpieces. use different dies, under different bending, can get the different

types of workpieces. the quality is reliable and stable.

 

 

3. light pole shutting welding machine

light pole shut welding machien model :500/12000, it is suitable for one piece type polygonal and

circle taper light pole. it is automatic welding line, the dolly with speed adjustable motor can pull the

light pole from small end to big end, The hydraulic cylinder through mechanical chain, worm wheel

push the clamping wheel to close the pole and do welding at same time.

 

 

4. light pole straightened machine

it is for straightening the street light pole and high mast after welding and Hot Dip

Galvanizing process.

 

5. shaering machine to cut the plate steel

the shearing machine can uct different thickness sheet metal, it is suitable to cut the base plate

of light pole.

6.  hydraulic iron worker

the machien can punching  and cutting the hole of the base plate of light pole

 

7. base palte welding machine

It is suitable for conical or round pole‘s base plate welding process.

Also, It is suitable for round bar, round pipe to do girth welding. According the pole or round

bar’s size to set the time for one turn rotation, push the button, the round bar will start to rotate,

at same time, the welding also will start. When one turn reached , the rotation and welding

will stop automatically.

 

 

8.  light pole door cutting machine

It is suitable for conical, octagonal light pole door CNC cutting, Also it can cut round pipe.

The cutting shape can be circle, square, rectangle, elliptic type etc and any which can be draw

designed by computer.