Motorized 160T/3200 Metal Sheet Bending Machine Hydraulic synchronization

Motorized 160T/3200 Metal Sheet Bending Machine Hydraulic synchronization

 suppling the sheet metal press brake/ plate press brake/ sheet bending machine

electrical press brake machine Performance

• the sheet press brake machine with Standard two axis control (Y,X)
• hydraulic bending Machine-wide steel plate welded structure, vibration to eliminate stress
• sheet metal press brake use Mechanically inclined block worktable deflection compensation
• The mold using segmented, can be segmented according to customer requirements
• The machine with Standard upper and lower mold, heat treatment (annealing, normalizing,
• quenching and tempering) process Front material supporting frame
• Selectable E21 or DA-41 NC controller.

standard plate press brake machine configuration

sheet bending machineTechnical Parameter

160 tons press brake Brief Introduction

• whole steel-welded, standard upper and lower dies, hydraulic transmission system,foot pedal with emergency stop.
• The press brake machine equips with DRO(digital readout) system to display the values of ram and backguage,(ball screws),and equip the side and back guard.
• To equip with light curtains for rear of shearing machine, you can use system from China made or sick from Germany
• the maunal sheet press brakes have the advantages of high quality, durability and high precision.
• The main frames of machine are constructed from rolled, stress relieved solid steel to prevent distortion during the bending process and under extreme continuous loads.
• Adjustable synchronized torsion bar with positive stop system which is controlled by the Digital Control unit, the bending beam parallelism tolerance will be consistent and accurate to 0.01mm.

The whole structure of press brake tool

•  NC plate press brake with Steel plate welded structure, hydraulic transmission, accumulator return, holistic processed,
• vibrating to
• eliminate stress, high strength and good rigidity.
• Mechanical torque system makes sure the synchronization of cylinders.
• The stroke of slider and back gauge is adjusted automatically by double servo motors or
• transducer, and showed on
• CNC Mechanical torque or NC control panel.
• Slanting wedges can be chosen to install on the top dies which can be adjusted by hands
• or automatically Hydraulic compensation system is installed under the worktable.

Hydraulic system

• Hydraulic control system by REXROTH Germany or FIRST America.
• Oil seals by Japanese, NOK.
• Overload & overflow protection to ensure there is no leakage and protect hydraulic system,
• and the oil level can be read directly.

Servo motorized back gauge for mechnical press brake machine

• CNC Back gauge system with X axis by AC servo motor driven ball screw shafts and on
• linear bearings with an accuracy of 0.01mm.
• Back gauge has well enough mechanical strength and rigidity with tank-type gauge structure.
• High-precision ball screw and linear guide-way. Particular finger-stop design, enlarge the
• range of back gauge.

Electrical parts and protection device

• Schneider or Siemens Low-voltage apparatus. In accordance with international standards,
• reliable safety, long life,
• good anti-interference ability, a radiation unit is fitted in electrical cabinet.
•  Protective fence and the safety interlock to ensure the operation safety. Have a movable
• single-hand pedal switch, easy to operate.
•  Light screen protection or Laser protection are optional.

download brochure here

hydraulic press brake.pdf