Section Benders Sheet Metal Forming Tools Shrinking Mechnical Drive
the CX08-350 Kraftformer is one of the medium-sized motor driven machines.
A special feature is the continuously adjustable working. A slow speed is selected to
form thicker material, for flattening, straightening or very precise finish forming. A high
number of strokes facilitates and speeds up stretching, doming (dishing), planishing
and planning. Like with all other JINQIU Kraftformer machines the large number of tools
available makes the CX08 --350 machine the perfect “all-rounder” in the sheet shop.
Shrinking and stretching are indispensable operations in aircraft manufacturing, mainly
for correcting and adjusting of pressed parts of all sorts. The special machines and tooling
offer a highly efficient solution to assure precise fitting together of the individual parts.
the sheet forming machine changes the traditional style of sheet forming by
manaually.reduce labour intensity and increase the productivity. it is widely
used to making palne. train.automobile,ship,electronic,light industry and etc.
it solved the technology that general dies are substituted for special dies.
Service And Maintenance:
The machine is of simple structure and does not require special maintenance.
However in order to prolong its working life please pay attention to the following item:
Lubricate all relevant points of the machine as per requirement of the lubrication
information plate, see figure below.
When stopping the machine be sure to push the selector button to “adjust” position,
step on foot switch S2 to lift the plunger for 1—2 seconds and then stop and switch
Before starting the machine be sure to clean up the work piece surfaces without
leaving a single spot of grease so as to make it easy for the shaping and prolong
the working life of dies.
Often check on the tension of the belt. If the machine is to lay idle for long period
of time the belt is to be loosened. Be sure to change belt in good time when it is
Emergency switch is not for stopping the machine in normal conditions. Do not use
it unless in emergency.
|Opening height between the connecting face of the upper and lower dies||
160～ 198 mm
|Stroke of plunger||8 mm|
|Plunger in feed adjustment||30 mm|
|Plunger punching frequency||0～ 400 timeses/ min|
|Max thickness of sheet the machine is capable of forming|
|Steel sheet ((s= 400 MPa)||2 mm|
|Aluminum sheet((s= 250 MPa)||2.5 mm|
|Copper sheet((s= 250 MPa)||2 mm|
|Stainless steel sheet ((s= 600 MPa)||1 mm|
|Machine weight||Net weight||Gross weight|
|500 kg||600 kg|
|Power supply||3～380V 50 Hz|
Warranty And Service:
one year warranty for whole press.
all spare parts are available as we produce most of the parts in our factory.
it is easy to get the electric parts as all are international famous brands.
we can provide technical support via email, phone or video.
we can send out engineers for service, installation or training with reasonable additional cost.
English operation and maintenance manual is provided with the press.
All safety warning tags and control panels are in English
More information please contact us: