Amour Steel 14mm thickness 1200T Hydraulic CNC press brake With R56 bending Radius
How to use 1200T CNC hydraulic press brrake machine:
1. turn on the power, open the key switch on the control panel, and press the pump to create a discussion,
so you can hear the pump turn. (This opportunity does not move)
2. route adjustment, bending machine must be used to adjust the road, not necessarily before bending test.
The upper die of the bending machine must have a clearance of plate thickness when it goes up to the bottom.Otherwise,
the mold and machine will cause waste relaxation.Distance conditioning is also electric evanescent adjustment and manual
3. bending slot choice, usually to determine the thickness of the plate 8 times the width of the slot.
If bending4 mm sheet metal, need to choose about 32 groove.
4. rear block mediation as usual with electric quick adjustment and manual fine-tuning,
the same way as the shearing machine.
5. step on the foot switch origin bending, bending machine and shearing machine differences, may relax at any time,
pinching foot bending machine will stop, continue to step up.
Components and Structure Description of high strength plate CNC press brake machine:
1. punching slider part: adopt hydraulic transmission,the slider part is composed of slider, oil cylinder and mechanical block fine-tuning
structure. The left and right oil cylinders are fixed on the frame, the piston (rod) is driven up and down by hydraulic pressure, and the
mechanical block is controlled and adjusted by numerical control system.
2. table part: by the button box control, so that the motor drive back and forth movement, and by the numerical control system to
control the distance of movement, its zui small reading is 0.01 mm (front and rear positions have stroke switch limit)
3, synchronization system: this machine is composed of torsion shaft, swing arm, joint bearing, etc. mechanical synchronization
mechanism, simple structure, stable and reliable performance, high synchronization accuracy. The mechanical block is adjusted
by the motor and the numerical control system controls the value.
4. material retaining mechanism: the material is driven by motor, the two wire rods are moved synchronously through chain operation,
and the numerical control system of NC bending machine controls the size of the material.
the upper punching of CNC hydraulic bending machinery
Option of CNC automatic sheet hydraulic press brake:
1.sectional tooling with different length may store forming a certian length to bend
2.servo motor drive the back gauge.
3.Automatic crowned deflection compensation
4.automatic front feedning device and rear pushing device
5.two-hand control device
6.light curtain protection or laser protection
7.any tailor made are available on ewqueste.