the CNC guillotine shear machine QC11K-16X6300 can cut the sheet metal of 16mm thickness and length 6300mm,
the front feeding device can automatic push the sheet to the setting position and the sheet metal is touched the back
gauge through the pneumatic cylinder.
then the shear machine cut the sheet, the cutting sheet will fall on the rear output dolly, there is two stoppers to stop
the cutting sheet sliding from the dolly, the stoppers use to tidily stack the cutting sheet.when the dolly load full cutting sheet,
there is two lifting device to lift the sheet through press the button, then press the button to move the dolly out from the shearing
machine.then the lifting device fall
down and leave the cutting sheet on the channel beam. and the dolly can move into the shear machinr for next cutting and loading.
the CNC shearing machine is easy to operate and convient.
automatic front feeding device
motorized rear output dolly