400Ton Economic Tandem Press Brake 7.5m Length Q235 Sheet Light Pole Bending Tools

400Ton Economic Tandem Press Brake 7.5m Length Q235 Sheet Light Pole Bending Tools

 

 

12Mn steel bending maachine/Stainless steel hydraulic tadem press brake machine

 

Structure And Performance features of CNC hydraulic press brake:

 

1. it is composed of two set of series WE67k same model machines, and wich are equipped

synchronizer equipment for duplex linkage.

2. Duplex linkage can porcess super long workpiece ,especially for city construction,

automobile manfacturing ,light pole,highway road, power pole and othe specialty parts.

3. each of two machine can be used solely and working together.

4. two machines in tandem to bend the work piece, the synchronous control system

send same propotion single to proportion valves on two machines to ensure two machine

work synchronized.

 

sheet bending machine Specification:

 

CNC Multi-machine      tandem hydraulic    press brake        model	Nominal pressure   (KN)	Length of table   (mm)	Distance between housings  (mm)	Throat depth  (mm)	Stroke    of   ram   (mm)	Strokes    of   ram  (mm)	Max.  open height  (mm)
2-WE67K-320/6000	3200	6000	4800	720	250	≥1.5	870
2-WE67K-320/7000	3200	7000	5600	720	320	≥1.5	870
2-WE67K-400/7500	4000	7500	5600	720	320	≥1.5	870
2-WE67K-600/6000	6000	6000	4800	1000	320	≥1.5	1000
2-WE67K-800/6000	8000	6000	4800	1100	350	≥1.5	1300
2-WE67K-1000/6500	10000	6500	4880	1400	400	≥1.5	1400
2-WE67K-1200/7000	12000	7000	5600	1600	450	≥1.5	1600
2-WE67K-1200/9000	12000	9000	6500	1100	450	≥1.5	1250
2-WE67K-1600/7000	16000	70000	5600	1600	450	≥1.5	1600
2-WE67K-1600/9000	16000	9000	6500	1100	450	≥1.5	1250
2-WE67K-2000/9000	20000	9000	6500	1600	450	≥1.5	1600
2-WE67K-2200/8000	22000	8000	6000	1100	450	≥1.5	1250

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hydraulic System of CNC press brake machine:

 

the servo electrical press brake machine adopt reliable electro-hydraulic proportional servo synchronization, it

can support eccentric load. the rate of oil follow in the vlaves can be auotmatic

controlledby grating sensor detection to the CNC system. it ensure the two cylinder

work synchronized.and it have overload protection function.

 

 

 

DA-56 system feature for CNC hydraulic press brake: 

 

The compact DA-56 provides easy CNC programming with the Delem 2D graphical product

design tool. Machine adjustment and test bends are reduced to a minimum because of the

quick and easy to use bend sequence determination tool. 
The CNC program is generated with a one touch key stroke.  You are ready to make the

first part since all axes positions are automatically computed and the bend sequence has

already been simulated on the screen with the machine and tools in real scale.
 In the production mode of the DA-56 the operator can graphically simulate the bend

process of the product guiding him during the press brake operation.
The basic machine control functions are Y1-Y2 and X axis, optionally a second back

gauge axiscan be used as R/Z or X2 axis. Also the crowning function is standard on board.

 

12m length mild steel press brake machine Safety rules

 

1. The person operate and maintain the press brake must read the rules carefully,

2. make sure that you have an understanding of the rules, and operate the machine

as perinstruction of the rules.

3. The machine must be supervised by authorized person. The operator and repairman

must understand the detail of operation, maintenance and safety rules.

 4. The correct thickness and the length of the workpiece must be entered into NC

system.To do so can avoid the high pressure caused by the length and thickness

entered which is more than actual value to damage the machine and dies or result

a injury. Not allow the working press force exceeding the nominal pressure.

 5. Not allow to adjust rated pressure of safety valve and balance valve because the

pressure have been regulated when delivery, failure to do so will make the machine

working unstable or damage the machine.When the system works abnormally, please

stop the machine immediately, and just only the professional person to maitain the

machine.please shut the power off and the ram must stay at the bottom dead point

when repairing.

6. Not allow to step the oil pipes avoid leakage of hydraulic system when checking

the machine.

7. Always keep the machine clean and wipe the dirty grease aviod accident because

of people sliding down.

8. Do not touch the pipes and oil tank during the machine working for a long time cause

of high temperature.

 

Option Configuration for 600 tons tandem press brake machine

 

 

numerical control system DA-66T	DELEM company from netherland
light curtian protection	SICK Germany
light curtian protection	SHUANGSHOU  China
laser protection	PILZ   Germany
Double hand operating switch	Schneider from France
hydraulic system	HYDAC from Germany
main motor	SIMENSE  from Germany
Grating sensor	Heidehain Germany
Oil pipe connecting	EMB  Germany

 

catalog of CNC hydraulic tandem press brake machine

CNC multi machine tandem hydraulic press brake.pdf

 

DA-56control system for WE67K-400/7500 tandem press brake