Manual Hydraulic Shearing Machine Metal Cutting Shear With 3.2m Blade
new type hydraulic shearing mahine/guillotine shear/press brake machine/cutting machine
Describle:
Hydraulic shearing machine
Small order is acceptable, have a good market all over the world.
It is adopted hydraulic driving, the frame steelwelded structure which
has sufficient strength and rigidity.
The machine is equiped with a power back gauge on whicn, a manual
fine-adjusting, mechanism for blade clearance, ashadw light device
enribing cutting operatikon, a connter, a sensitive and reliable safety barrier.
It can also be equipped with a support conveyor.
Whole steel welded frame with full strength and rigidity.
Hydraulic upper transport.
Hydraulic press device with reliable safety bar.
Rapid cutting stroke adjustment is adopted, cutting frame can be adjusted
ensuring priduction efficiency increase when cutting short sheet.
Back-gauge station adopts motor-driven measure with fine manual adjustment.
Cutting counter device.
Light line device so it is easy to draw line for cutting
Contrusction:
Hydraulic top-drive, steadiness and reliability
Steel-welded construction, vibration to eliminate stress, with high strength
and good rigidity
Mechanical stop, steel torsion bar to maintain synchronization, high precision
Motorized-adjusting device of back gauge and ram's stroke, fine adjusting
by hand wheel, numerical display
Travel limit protection, full machine guarding with safety interlocker
Specification and Parameters:
| No. | Name | Unit | Specification | |
| 1 | Max. cutting thickness | mm | 6 | |
| 2 | Max. cutting width | mm | 3200 | |
| 3 | Material strength | MPa | 450 | |
| 4 | Cutting angle | degree | 1.5 | |
| 5 | Backgauge stroke | mm | 20-600 | |
| 6 | Strokes | min-1 | 14 | |
| 7 | Housing distance | mm | 3420 | |
| 8 | Length of blade | mm | 3300 | |
| 9 | Worktable height | mm | 802 | |
| 10 | Axial plunger pump | Model | 25MCY14-1B | |
| Flow | ml/r | 25 | ||
| Pressure | MPa | 31.5 | ||
| 11 | Main motor | Model | Y132M-4, B5 | |
| Power | kW | 7.5 | ||
| Speed | r/min | 1460 | ||
| 12 | Backgauge motor | Model | Y80M2-6, B3 | |
| Power | kW | 0.55 | ||
| Speed | r/min | 970 | ||
| 13 | Overall dimensions | Length | mm | 3840 |
| Width | mm | 1610 | ||
| Height | mm | 1630 | ||
| 14 | Weight | kg | 6260 | |
| 15 | Capacity of tank (L-HL46 hydraulic oil) | kg | 257 | |
Adjustment of the gap between blades:
The proper adjustment of the gap between blades is one of important factor which directly effect the cutting quanlity and the service life of the blades.So the value of the gap recommened refers to the following chart.
When adjusting the gap(refer to Fig4.2),only unscrew the clamping screw (3)then turn the handwheel to the value needed,finally clamp the screw(3) tightly.
Techncial Data:
| 1 | Type | NC Hydraulic Swing Beam Shear | |
| 2 | Cutting length | 2500 mm | |
| 3 | Cutting thickness | 6 mm (mild steel at 450 Mpa) | |
| 4 | Shear angle | 1°30’ | |
| 5 | Number of stroke per minute | 18 | |
| 6 | Throat depth | 150 mm | |
| 7 | Control system | E21s Estun China | |
| 8 | Control axis | X back gauge | |
| 9 | encoder | China | |
| 9 | Screw of back gauge | Ball screw | |
| 10 | Stroke back gauge | 600mm | |
| 11 | Main motor | 7.5kw | |
| 12 | Main Electric Elements in cabinet | Schneider or Siemens | |
| 13 | Seal in the cylinders | NOK, made in Japan | |
| 14 | Hydraulic pump | China | |
| 15 | Main hydraulic components | China | |
| 16 | Net weight | 5300 kg | |
| 17 | overall size (mm) | 3140x1610x1630 | |
| 18 | Packing: | Iron Pallet with plastic cover | |
| 20 | Delivery | 30 days after sign the contract | |
Components and parts :
Hydraulic system: ATOS Italy or REXROTH (Germany);
Pump:pluger pump;
Electrics: Germany Schnerdei/Omron;
O-rings: Japanese NOK;
Ball screw: high percision;
Foot Switch: Karcon (South Korea)
back gauge counter: Mechnical type counter
cutting time counter: digital display yte counter
Our Service:
Provide Pre-sales Consultant & On-purchase service 8 hr × 6 days per week
Reply within 24 hours
Provide relevant product information
Answer questions if request
Give technical suggestion
Provide After-sales service 24hr × 7days per week
Test the machine before shipment
Provide technical guidance relate to use the machine
Supply one-year warranty period for the machine
Provide the spare parts at cost price after warranty period
Collect the feedback for the machine working
Provide long-term technical assistance.
More information please contact us:
wxmachinery@163.com
WhatsApp: +86 13961729519
Skype:zouqicheng
QQ:2308574039
dwonload brochure here
hydraulic shearing machine.pdf
Machine photo:
Our products are sold all over the world, you can rest assured.
