NC Hydraulic Guillotine Steel Cutting Machine / Guillotine Metal Shear
Special producing hydraulic guillotine shear, hydraulic shearing machine,hydraulic cutting machine, sheet press brake machine, CNC press brake,tandem press brake, bending machine
Describle
- The hydraulic shear machine with front –feeding platform has equipped with ruler for the plate feeding and also smooth in the surface to protect the plate in any surface hurting when feeding.
- The ruler can be precision into MM or more unit for accuracy control and checking.
- The electronic box been equipped with good certificated components.Mostly we use CE certificated SIEMENS or Schneider components for exportation machines and also some high quality CCC certificated components to carte for different standard needs clients.
- The machine body steel ,we mostly choose China top brand steel plate provider Shanghai BAOSTEEL with good quality and been treated with anticorrosive paint before the last paint on. So the machine firstly will have good durable usage and also perfect outside appearance.
- The blade :The blade material is 9CrSi or 6CrW2Si, the material is high tested material with thousand times for high rigidity and cutting result. The up blade is rectangle blade with four blade edges which is different from QC12Y Swing Beam shear machine (The detailed please check SIECC/SIECCTECH blade explain photo and instruction). The blade clearance can be adjusted by manual or by motor.
- Both has the index dial to display the clearance so the control and display can be easily. And the up blade shaft use tilting structure to promote the shearing precision.
- The machine equipped the press foot to press the plate stably when cutting,
- the foot has been equipped with plastic surface with high fraction without surface destroy of the plate. For Hole plate,we will equip square foot for stable square press.
- Gear Pump: We use good brand “straight conjugate internal gear pump” in both
- China brand Shanghai chengjie or Germany Eckerler. The internal gear pump is treated as never wear pump in industry and has been widely used in high precision hydraulic machines with the character of low-noise,no pulsation and long lifetime. Shanghai Chengjie gear pump also used in China’saircraft industry so it is trustable and reliable. When in high speed working, the audio is flat and smooth even no trapping. The long lifetime is depend on his abrasiveperformance the inner machine components has oil film protection layer, so even use normal hydraulic oil, even no abrasion.
Specification and Parameters:
No. |
Name |
Unit |
Specification |
1 |
Max. cutting thickness |
mm |
13 |
2 |
Max. cutting width |
mm |
8000 |
3 |
Material strength |
MPa |
450 |
4 |
Cutting angle |
degree |
0.5-2.0 |
5 |
Backgauge stroke |
mm |
20-1000 |
6 |
Strokes |
min-1 |
7 |
7 |
Housing distance |
mm |
7230 |
8 |
Length of blade |
mm |
8200 |
9 |
Worktable height |
mm |
900 |
10 |
Axial plunger pump |
Model |
|
IPH-5B-64-11 |
Flow |
ml/r |
64 |
Pressure |
MPa |
31.5 |
11 |
Main motor |
Model |
|
Y132M-4, B5 |
Power |
kW |
30 |
Speed |
r/min |
1460 |
12 |
Backgauge motor |
Model |
|
Y200L-4,B35 |
Power |
kW |
0.55 |
Speed |
r/min |
970 |
13 |
Overall dimensions |
Length |
mm |
9255 |
Width |
mm |
3050 |
Height |
mm |
3545 |
14 |
Weight |
kg |
62800 |
15 |
Capacity of tank (L-HL46 hydraulic oil) |
kg |
1749 |
Contrusction
- Hydraulic top-drive, steadiness and reliability
- Steel-welded construction, vibration to eliminate stress, with high strength
- and good rigidity
- Mechanical stop, steel torsion bar to maintain synchronization, high precision
- Motorized-adjusting device of back gauge and ram's stroke, fine adjusting
- by hand wheel, numerical displayTravel limit protection, full machine guarding with safety interlocker
Maintenance
- Check the blades periodically,if the edge of blade is blunt ,resharpen or replace it.
- Check all the parts of the
- machine periodically and keep cleaness of machine andworking area and good
- insulation of wires.
- Regularly check and clean the wire-mesh oil filter fixed on inlet of oil punmp enabling
- proper oil flow to pass through it.If the filter is blocked,the oil flow will reduce and the
- oil pump will run in empty condition,thus reducing service life of pump.
- The main lubrication point of the machine must be greased with the calcium grease
- ZG-3 (GB491-87) or mixed oil with the 50% L-HL46 oil (GB11118.1-94), for detailed
- position and volume of injection please please refer to the Lubriction Plate on the
- side of machine.
- If there is any abnormal action or noise ,the machine should be stopped for checking.
- The user should prepare the spare parts according to the spare parts list attached
- with the machine for repairement.
- The machine must guarantee the precision of delivery after repairment.
Components and parts :
Hydraulic system: REXROTH (Germany);
Pump:Gear pump Nachi Japan
Electrics: Germany Schnerdei/Omron;
O-rings: Japanese NOK;
Ball screw: high percision;
Foot Switch: Karcon (South Korea)
blade gap ; automatic adjsuting
control system: DTC-660touch screen or E21 system
Our Service:
Provide Pre-sales Consultant & On-purchase service 8 hr × 6 days per week
Reply within 24 hours
Provide relevant product information
Answer questions if request
Give technical suggestion
Provide After-sales service 24hr × 7days per week
Test the machine before shipment
Provide technical guidance relate to use the machine
Supply one-year warranty period for the machine
Provide the spare parts at cost price after warranty period
Collect the feedback for the machine working
Provide long-term technical assistance.
download brochure here
hydraulic guillotine shear.pdf
Machine photo: