130 Ton X 13'' Hydraulic Steel Plate Bending Machine 4 Axis CNC Programmable

130Ton x 13' Brand New CNC Hydraulic Press Brake Machine 4 Axis CNC Programmable

hot sell CNC hydraulic press brake machine,hydraulic folding machine and bending

machine

Heay press brake machine Description

130Ton x 13' Brand new 4 Axis CNC Programmable Vertical Hydraulic sheet Press Brake

machine,Mdl. WE67K-130/4000 CNC,125 Ton Maximum Pressure, 13" Table Length, 4 Axis

Control, Repetitive Accuracy within 0.04mm, Light Curtain, Industrial Grade Hydraulic System,

Adjustable 2 Step Downward Travel, Quick Release Tooling System, Ball Screw Back

Gauge with Linear Guide Rail, Accepts Any Standard Press Brake Tooling, Foot Pedal

Controlled, Multi Vee Bottom Die & Gooseneck Punches with Quick Change Holders,

220V/60HZ~3 Phase.

Standard Equipment for CNC press brake: (All of the following comes with the machine)
• manual press brake Ram Deflection Adjustment
• Servo proportion valve and sensor raster Control Ram Depth
• Massive Torsion Bar for Parallelism
• Forged Heavy Duty Cylinder and Cylinder Body
• Three Speed Ram
• Rapid Approach, Bending Cycle and Rapid Retreat
• Bottom Time Delay
• All Steel Construction
• Inching, Single Cycle and Continuous Operation
• Ram takes standard Europe or America Tang Tooling (1/2” x 5/8”)
• Space between Ram Tool Clamps allows for deep box bending
• Bed has slot for standard Europe or America tang tooling
• Bed also holds tooling with capture clamps
• Free Gooseneck Punch and multi-opening Die for up to 90° forming in 10 gauge mild steel

Stainless steel press brake machine Specifications

Availabe Options of 12m length press brake machine

CNC 8-Axis Color Graphic Control:
Controls BOTH Bend Angle and Backgauge Position of CNC press brake machine. Comes with

10” LCD touch screen.

Code
And Graphic programming included. Graphic allows 10 bends per program/cross-section.

Controls features a tool library, Metric/inch switchable, Auto bend sequence, Auto retract of

Backgauge, Spread length, Interference bend alert, Calculated bend allowance, Programmable

ram dwell and much more.
Control stores thousands of programs with USB Port, Ethernet and RS232 for program backup.
• Sick Model 4000 Light Curtain System
• Pilz PSENvip LED Safety Guarding
• Third Axis (Back Gauge Height)
• High Speed Servo Back Gauge
• Training in our Memphis, TN Facility No Charge
• Training at customer site, less than 300 miles from Memphis
• Training at customer site, more than 300 miles from Memphis
(If outside continental USA, please call for quote.)

hydraulic system of hydraulic cylidner of CNC press brake

Manual press brake machine Character:
1. press brake machine used to bend the door frame, electrical box, steel structer ect.

it daopt Steel welded structure, vibrating treatment to remove the inter stress, with high strength

and good rigidity
2. Hydraulic top-drive, steadiness and reliability, mechanical stop, steel torsion bar to

maintain synchronization
3. Motorized-adjusting device of back gauge and ram stroke, fine adjusting by hand wheel,

numerical display
4. Using travel limit protection, full machine guarding with safety interlocker
5. Two cylinders controlling beams vertical moving
6. Using mechanical torsion synchronization
7. Using Integration hydraulic system
8. Using standard punches and dies
9. Using hanging arm control panel
10. Using foot pedal with emergency stop

Special Note for press brake die:

The Gooseneck Punch and multi-opening Die included are general purpose tools to be

used for training only. Precision tooling should be purchased to meet your specific needs.

The punch is segmented and it is up to the customer to calibrate these if they want to use

them for a particular purpose. There is NO warranty on these items.

Performance of CNC press brake machine:

the CNC Synchro press Brake machine use state-of- the-art hydraulics (Bosch-Rexroth or Hoerbiger)

and electronics (Telemecanique, Merlin Gerin Legrand, Siemens) to ensure accurate control

of the bending process. The Press Brake Frame is a robust welded mono-block steel

construction, stress relieved after welding and machined without repositioning to guarantee

machine precision, all-in-all, ensuring minimum deflection during bending operation. Pistons

are steel forgings,

precision ground and micropolished for long production life. The Synchronised Press Brake is

a downstroking twin cylinder hydraulic pressbrake (Y1 – Y2 Axis)

download brochure here

CNC hydraulic press brake machine.pdf

110T CNC Electrica Hydraulic press brake machine picture: