Steel Shearing Machine Electric Guillotine Shearing Machine Cutting Raw Material
sell hydraulic guillotine shear, hydraulic shearing machine,hydraulic cutting machine, sheet press brake machine, CNC press brake,tandem press brake, bending machine
Steel Plate Cutting machine feature
1. Sheet plate welded structure
2. Hydraulic transmission and accumulator return
3. Reliable performance and nice appearance
4. With numeric-control system special for shearing machine
5. Counting function
6. Digital display device is available
7. Frequency conversion control technology
450Mpa sheet plate shearing machine parameter
|Maximum shear plate thickness
|Maximum cutting width
|Shear plate strength
|Maximum rear stop stroke
|Fuel tank volume
|Main motor power
Hydraulic guillotine shear (shearing machine)
1. The design style of shearing machine is as per Germany Standard DIN55222T2-80
2. The frame is steel welded construction, vibration to eliminate stress, with high strength
and good rigidity
3. Adopting rolling guiding way with three point support to make sure good cutting quality
4. The back gauge is adjusted by motor and fine adjusted by hand wheel. The strokes is
shown by autonics digital displayer and can be adjusted stepless.
5. The gap between upper and bottom blades can be adjusted by hand wheel.
6. Rectangular blades have four cutting edges and have long service life.
1. First valve (from U. S. A) make sure good working, long service life and low noise.
2. NOK oil seal (from Japan) prevents oil leaking with long service life
3. Sleeve type pipe joint to make sure there is no oil leaking
4. Best quality pump provide long service life and low noise
1. Schneider or simense electric parts with good quality and easy to replace around
2. Autonics digital displayer (from Korea) has good accuracy and long life
3. Autonics encoder (from Korea) has good accuracy and long life
4. Best quality motor provide enough power and low noise.
electrical Power cutting Machine Introduction
1. Rack part of guillotine shear
- By the frame structure of steel plate welding, with good rigidity,
- two oil cylinder fixed on the top two columns, the workbench to
- stud welding connection.Under the blade mounted
- on the workbench, and can make minor adjustments, make blade gap even.
2. Upper slide rest for hydraulic guillotien shear
- For steel plate welded structure, with good rigidity, after its former roller
- for the fulcrum,in the driving of the oil cylinder reciprocating movement
- up and down around the complete shear.Adopts three point rolling guide rail,
- eliminate the guide clearance, improve the quality of shear.Rectangular blade,
- four parts all can use, long service life.Rest on the structure of
- introversion, facilitate blanking, and can improve the precision of the work.
- Rest on the shearing Angle is adjustable, reduce the deformation of
- sheet metal distortion,
- the handwheel adjustment on the front panel, the left side of the blade
- gap instructions;Front and rear guide rail and the roller adopt alloy steel forging.
3. Press device
- By installing more pressure on the supporting plate in front of the frame material
- of oil cylinder,
- material cylinder inlet pressure, pressure is expected to head down after
- overcome the spring tension,pressure plate, after completion of the shear,
- by means of the torsion spring
- tension and reset.
- The size of the force that press a material increases with increasing by shear
- of the thickness of the sheet metal.
4. Keep-off institutions
- Before keep-off:By the before keep-off rack and Scale and left limit baffle,
- etc composition.
- After keep-off(back gauge):In the upper slide rest under the rung, Along
- with the rest on the upand down, back gauge regulation by screw driven
- by a motor drive. Control the movement distance,
- and has a soft limit loading system.. The motor can not meet the need to
- size, manual and fine-tuning to ensure that the required values to adjust.
- So the back gauge adjustment
- is convenient and reliable.
5. Machine hydraulic system
- This machine adopts hydraulic transmission, the main gear pump, hydraulic
- system through one-way valve,relief valve system, electromagnetic directional
- valve and livestock can opener, etc.
- The system is reasonable,
- the movement is stable and reliable.
- According to mark the direction of arrow rotation after motor startup,
- ( When the electromagnetic valve does not work) Drive gear pump will be filtered
- oil through oil suction pipe into the valve plate and the electromagnetic valve
- after back to the tank.
- Supply pressure by the gear pump used in the system,
- the system maximum working pressure for 20 Mpa, set by the overflow valve,
- the hydraulic valve have been setting before they go out, normally the user d
- oes not need any adjustment, Shanghai hydraulic
- valve is used in the hydraulic valve, all seal wall card, choose Japan line
- decorate concise, less leakage,easy maintenance and debugging.
6. The machine electrical system
- This machine adopts the 50 hz, 380 v ac power supply, by the main loop of
- the transformer output 220 voltage control, electromagnetic relief valve,
- indicator light and button.. Machine electrical box located on the left side
- of the machine tool, control button in front of the machine installation,
- easy operation,which leads to the pedal switch SA3 lead by the electric box.
- The machine through the knob switch can be a single, continuous and
- dynamic capabilities. Machine also has the shear length adjustment,
- turn knob, time relay external knob, can adjust length of shear, rotate the rotary
- switch SA2, rev. Bright lights to the line, mobile cut sheet metal, make the row
- in the sheet metal processing line and machine blade projection overlap,
- can shear required results. Electrical components by Siemens.
- Main circuit has corresponding overload and short circuit protection function,
- safe and reliable, easy to maintain.
1. The second generation of Hydraulic swing beam shearing machine.
2. Rack, blade frame is entire welded,vibration to eliminate inner stress,to maintain
3. Use advanced integrate hydraulic system and good reliability.
4. Use three-point support rolling guide to eliminate the support gap,improve cut quality.
5. The clearance between the blades adjusted by hand wheel rapidly,accurancy and
6. Rectangular blade.four cutting edges, and loong service life.
7. Adjustable shearing angle to reduce deformation of the sheet.
8. The upper blade frame use introversion structure,easy for blanking to improve the
accuracy of production.
9. With the sub-shear function, motorized backgauge,digital display.
download brochure here
hydraulic guillotine shear.pdf