Automatic Feeding Plate Shearing Machine 20' Long Hydraulic CNC Guillotine Shear

Atomatic Feeding Plate Shearing Machine 20' Long Hydraulic CNC Guilltotine Shear
 

buy hydraulic guillotine shear, hydraulic shearing machine,hydraulic cutting machine, sheet press brake machine, CNC press brake,tandem press brake

Shear machine Summary
This instruction manual of hydraulic shearing machine attached with the machine is very important documents to instruct theuser to use and maintain the machine correctly, and keep this manual properly

for check if necessary.
The sheet metal guillotien shear machine is designed, manufactured or inspected according to the standards as below:
GB/T 28762-2012 << NC shears>>
JB/T 5197-91<<Technical Conditions of Beam Shear >>
 
Shear machine Specification and Parameters

 CNC sheet seharing machine Standard configuration

Features of Machine for 8'' sheet shearing machine

• The plate cutting machine frame of machine is welded construction with steel plate and the machine is driven by
• the Nc guillotine shear with hydraulic system, the machine working steady and reliably, low noise and easy to operate.
• The machine is equiped with front and back gauge. The backgauge is controlled by NC system,
• and adjusted conveniently, accurate and reliably. The frontgauge use a gauge ruler to measure
• and stop finger to positioning. The stroke of upper beam can be adjusted stepless, to improve
• the strokes when cutting the narrow sheet. The safety barrier guard is installed at the blades area
• of the machine for safety operation, and the sheet can be fed into the center of sheet pressing
• cylinder directly. The mechanism of the blades gap and the mechanism of shearing angle can be
• operated simply, conveniently.
• front feeding Deivce:
• the machien equip the automatic front feeding device, it adop the touch screen system to control
• and drive by servo motor. the clamping system is pnenmatic type. it tighly clamp the sheet to forward moving quickly, it will slowly move when it close the back gage and automatic push sheet on the back gauge.

 
Character

• the guillotine shear machine equip the front feeding device and rear unloading device. the shear blsde use the Cr12Mvo material,
• All steel welded structure,vibrating treatment of ageing for removal of internal stress,with good rigidity and stability.
• CNC front feeding guillotine shear with Intergrated hydraulic transmission system,with good reliability.
• Triple support rolling guide raikl to eliminate gaps of support and enhance shearing quality.
• Mechanical rear stopper with manual fine tuning,and digital indication.
• Clearance in between shearing blades adjusted by hand wheel to be quickly.
• accurate and convenient.
• Rectangular blades with four cutting edges to prolon working life,adjustable
• shearing angle to reduce deformation of the sheet.
• Upper blade holder has inward tilting struction to facilitate material feed in and also
• enhance of the work piecision.
• Function of shearing in section,function of aligning with light

Enclosed Accessory

• Front arm support, 6pieces
• Anchor bolt, 4 pieces
• Nut, some pieces
• Washer, some pieces
• Oil gun, 1 piece
• Foot pedal 1 piece
• pneumatic device  1 peice

Operational & Environmental Conditions of Machine

The machine must be located in the shop where direct sunlight shine shall be avoided, and
environment is with low humidity, less dust and good ventilation.
Caution: Please read attention of safety operation in this machine carefully before starting use.
 
Machine picture: