Digital Dispaly Light Pole Machine Automatic Feeding For Street Lamp Light
Application:
The steel plate slitting line used to uncoil light pole material, leveling, cutting, scrape edge
slitting and taper slitting process, to get one side small width, one side big width steel plate.
The trapezium sheet use to bend the taper type light pole. It also can cut the rectangle sheet
to bend the Isodiametric light pole.
Slitting machine equipped:
1. coiled steel loading dolly car:
UP and down: Hydraulic, Horizontal moving: motorized,loading weight: 15Tons
2. Hydraulic double-head umbrella type decoiler:
Including:Motorized pay off, Motor, reducer,
The chain system takes the shift to rotate. The rotation direction can be clockwise
and anticlockwise.
3. Hydraulic guiding-pressing, shovel-head, pinch and feeding device:
It is for taking the head of the steel coil to feeding unit, hydraulic up and press to
avoid the steel coil loose.
4. Middle rolling way worktable:4M
5.Leveling unit:(two lay type),
Including:speed adjustable motor, reducer, gearbox.
The leveling roller are deal with heat treatments,40Cr. HRC48
Up and down roller total 13. (including 1 pair of pinch roller)
It have length measuring unit:Rotated the encoder sends the length signal to
control system and control the certain length.
Note : option : four lay type leveling unit with individual guiding unit.
6. Cutting machine:
Including:Hydraulic swing beam shear Q12Y-6*2000.
7. Double edge slitting unit.
It is for slitting scrape edge of the hot rolled steel plate to get the exact width for
light pole. It is base on the rolling shearing principle to cut the sheet. There is a
dolly in the front of the slitting unit. It is for control the straight cutting. By change
the position of the slitting blade to get different width for different size light pole sheet.
8. Taper slitting unit
The taper slitting machine is base on the rolling shearing principle to cut the steel sheet.
There is a dolly in the front of the slitting unit. It is for control the taper cutting degree.
By change the position of the stopper on dolly to control the taper slitting rate.
9. Ball type support table 14 m for finished taper sheet
10. Electrical system:
Central control table. PLC, AC driver inverter
16. Hydraulic system:
hydraulic station, valves, oil tank, joint, soft pipe, hard pipe and so on.
Technical Parameter:
1 | Thickness of material | 2-6mm coiled steel |
2 | Width of material | 800-1600mm |
3 | Weight of the coiled | 15000kg |
4 | Inner diameter of the coil | Φ500-Φ750mm |
5 | Speed of leveling | 5-15m/min |
6 | Roller number of the leveling | 13 group |
7 | Leveling rollers diameter | 160mm |
8 | Length range for scale | 2000~12000mm according requirements |
9 | Tolerance of cutting length | ±15mm (base on 8m length plate) |
10 | Main leveling motor power | 37kw (total about 65KW) |
11 | width area for machine | About 7000mm |
Warranty and service:
one year warranty for whole press.
all spare parts are available as we produce most of the parts in our factory.
it is easy to get the electric parts as all are international famous brands.
we can provide technical support via email, phone or video.
we can send out engineers for service, installation or training with reasonable additional cost.
English operation and maintenance manual is provided with the press.
All safety warning tags and control panels are in English
Photo: