Q35Y Combined Hydraulic ironworker Machinery , Steel Hole Punch Machine
Q35Y Series hydraulic combined punching& shearing machine can cut and punch
all kinds of materials such as plate, square bar, angle, round bar, channel and so on.
KRRASS Industrial hydraulic ironworkers have been designed and built to the highest
quality standards in the industry.
This profitable machine will serve any grueling fabrication shop for decades to come.
This machine is typically in stock for quick deliveries.
Full range of universal punches and dies are available.unique style allows for large angle
iron punching and large channel punching. Large viewing window on stripper swing away
design for ease of operation. large two piece gauging table with rulers and stop as standard
fittings. Quick change coupling nut and sleeve for rapid replacement of change.
Round and square bar shear has multiple holes for a variety of sizes. Adjustable hold down
device for round/square bar,
channel/beam cutting. Large strong guarding for max safety. The angle shear has the ability
to cut angle at 45°both top and bottom leg.
This gives the operator the ability to make a picture frame corner for perfect welds. Diamond
shaped blade for quality cuts that is minimal
material lost and deformity. Easily adjustable hold-down device for accurate plate cutting.large 15″squaring arm with inlaid scale.Special anti-distorted blade for quality cutting.
Lower blade has four usable edges. There is screw allow for gap adjust no shim needed.
3 . Notching
Unique design allows for cutting of angle and flat bar. Electrical interlock safety guard and
three gauging stops for precise positioning. The notching section of this hydraulic ironworker
is perfect for notching out metal plate,
angle iron and much more. The notching station also has an oversized table with material stops.
This section of the machine can also be outfitted with the optional vee notcher.
Also bend the plate below 500mm. All the components of Machine are of the highest quality in
their safty, function, capability and maintenance.
|Angle of shearing||°||7°||8°||8°|
|Max. shearing thickness||mm||16||20||25|
|Flat bar||(W×T) mm||250×16||330×20||330×25|
|90°shearingof equal-angle bar||mm||120×120×12||140×140×12||160×160×14|
|45°shearing of equal-angle bar||mm||70×70×8||70×70×10||80×80×7|
|90°shearing of T-bar||mm||120×120×12||140×70×12||160×80×14|
|I beam steel||mm||126×74×5||160×86×6||200×102×9|
|4||punching hole||Max. punching thickness||mm||16||20||25|
|Max. diameter of punching||mm||25||30||35|
|Depth of throat||mm||300||355||400|
|Max. length of cylinder stroke||mm||80||80||80|
1. a pair of round hole punching die
2. a set of angle steel blade
3. a set of square and round bar blade
4. a set of shearing plate blade
5. a set of notching blade
The above punching and moulds will be installed in the machine.
For other dies and blades, customers need to order and pay additionally.
Package: Wooden Case or iron pallet with plastic cover
Deliver time: 10 days after getting deposit.
Download brochure here:
More information please contact us: