CE Approved Q35Y Hydraulic Iron Worker Machine To Section Bar Punching

CE Approved Q35Y Hydraulic Iron Worker Machine To Section Bar Punching

 

Introduction:

 

hydraulic ironworkers have been designed and built to the highest quality standards

in the industry.

This profitable machine will serve any grueling fabrication shop for decades to come.

This machine is typically in stock for quick deliveries.

 

1. hydraulic cutting iron bar cutting machine

Full range of universal punches and dies are hydraulic ironworker available.unique

style allows for large angle iron punching an large channe punching.Large viewing window

on stripper swing away design for ease of operation.

large two piece gauging table with rulers and stop as standard fittings.Quick change

coupling nut and sleeve for rapid replacement of change.

 

2. hydraulic cutting iron bar cutting machine

Round and square bar shear has multiple holes for a variety of sizes. Adjustable hold down

device for round/square bar,channel/beam cutting. Large strong guarding for max safety.

The angle shear has the ability to cut angle at 45°both top and bottom leg.

This gives the operator the ability to make a picture frame corner for perfect welds.

Diamond shaped blade for quality cuts that is minimal material lost and deformity. Easily

adjustable holddown device for accurate plate cutting.

Large 15″squaring arm with inlaid scale.Special antidistorted blade for quality cutting.Lower

blade has four usable edges.There is screw allow for gap adjust no shim needed.

 

3. hydraulic punching-shear machine Notching

Unique design allows for cutting of angle and flat bar. Electrical interlock safety guard and

three gauging stops for

precise positioning.The notching section of this hydraulic ironworker is perfect for notching

out metal plate,

angle iron and much more. The notching station also has an oversized table with material stops.

This section of the machine can also be outfitted with the optional vee notcher.

 

4. hydraulic ironworker machine Bending flat sheet and angle steel.

Also bend the plate below 500mm. All the components of Machine are of the highest quality in

their safty, function, capability and maintenance

 

 

 Features:

 

Flat bar cutting, profile cutting, punching hole and notching work can be performed on the

machine within the rated specification, with extra equipment, the machine is able to cut, punch

and bend in special shape.

The machine adopted hydraulic driving system and has a perfect structure, with light weight

and low noise, stable performance and overload protecting device.

The machine is mainly used for cutting flat bar, profile, punching hole and notching. It can be

widely used in Shipyard, Electric, Bridge, Auto-mobile, Hoisting & Transportation, Metal

construction and other machinery factories etc.

 

 

Specification:

 

No.	Function	Item	Unit	Q35Y-16	Q35Y-20	Q35Y-25
1	Shearing plate	Angle of shearing	°	7°	8°	8°
		Max. shearing thickness	mm	16	20	25
		Flat bar	(W×T) mm	250×16	330×20	330×25
				400×8	480×10	600×16
2	Shearing bar	Round steel	mm	45	50	60
		Square bar	mm	40×40	45×45	50×50
		90°shearingof equal-angle bar	mm	120×120×12	140×140×12	160×160×14
		45°shearing of equal-angle bar	mm	70×70×8	70×70×10	80×80×7
		90°shearing of T-bar	mm	120×120×12	140×70×12	160×80×14
		I beam steel	mm	126×74×5	160×86×6	200×102×9
		channel steel	mm	126×53×5.5	160×60×6.5	200×75×9
3	Notch	thickness	mm	10	10	12
		width	mm	80	80	80
		depth	mm	100	100	100
4	punching hole	Max. punching thickness	mm	16	20	25
		Max. diameter of punching	mm	25	30	35
		Punching force	Ton	60	90	120
		Depth of throat	mm	300	355	400
		Max. length of cylinder stroke	mm	80	80	80
		Stroke times	times/min	6	8	6
5	Material strength		N/mm2	≤450	≤450	≤450
6	Motor power		KW	4	5.5	7.5/11
7	Overall dimensions		(L×W×H)	1650×800×1780	1950×900×1930	2350×980×2100
8	Net. weight		KG	1900	2600	4400

 

After-Sale Service:

1. Two year warranty is provided.
2. Customers can send photos or samples for our confirmation once the parts are

damaged within the two year warranty. If the parts are not damaged by misoperation,

we will reply to customers within 48 hours and provide free parts for replacement. Besides,

for the parts out of commission and beyond the warranty, we only charge for the basic

costs of parts.
3. We regularly follow up the service condition of products, and timely analyze and copy

with the feedbacks. As for the disputes, we will figure out effective actions to reach mutual

satisfaction.

 

Dwonload brochure here:

ironworker.pdf

 

 

More information please contact us:

 

wxmachinery@163.com

 

WhatsApp:+86 13961729519

 

Skype: zouqicheng

 

QQ: 2308574039

 
Machine photo: